LSI Corporation
- 120 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 5: The HII Configuration Utility
Managing Controllers
Figure 84 Disable Drive Security Warning
2. Read the warning and be sure you understand what will happen if you disable the drive security.
3. Highlight Confirm and press the spacebar to select it.
4. Highlight Ye s and press Enter.
Drive security is disabled.
5.4.7 Changing a Security Key
The Change Security Key dialog appears when you select Change Security Key from the Advanced Controller
Management menu.
Perform these steps to change the security key settings.
1. Highlight OK and press Enter.
The following dialog appears.
Figure 85 Change Security Key
To Next Page
Loading...
