LSI Corporation
- 78 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 4: Ctrl-R Utility
Viewing and Changing Device Properties
The information in the Properties screen (Figure 19 on page 51) is read only. Most of this information is
self-explanatory. To view additional properties, navigate to Next, and press Enter.
4.13.2 Modifying Controller Properties
You can change the properties of the controller in the Ctrl Mgmt menu.
Perform the following steps to change the controller properties:
1. Navigate to the Ctrl Mgmt menu to view the first Controller Settings screen.
2. You may change the values of the properties for the editable fields.
To change additional properties, such as link speed, battery properties, and power settings, press Next to go to
the second Controller Settings screen.
3. Press Apply.
The following table describes all entries and options listed on both the Controller Settings screen. Leave these
options at their default settings to achieve the best performance, unless you have a specific reason for changing them.
To Next Page
Loading...
