LSI Corporation
- 208 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 7: MegaRAID Storage Manager Overview and Installation
Installing MegaRAID Storage Manager
Figure 118 Custom Setup Window
14. Click Next to proceed.
15. Click Install to install the program.
16. When the final Configuration Wizard window appears, click Finish.
If you select Client installation for a computer that is used to monitor servers, and if no available servers exist with
a registered framework on the local subnet (that is, servers with a complete installation of the MegaRAID Storage
Manager software), the server window appears. The MegaRAID Storage Manager - Host View window does not
list any servers. You can use the MegaRAID Storage Manager - Host View window to manage systems remotely.
7.3.2.1 Setup Options
The MegaRAID Storage Manager software enables you to select from one of the following setup options when you
install it:
Select the Client radio button if you are installing the MegaRAID Storage Manager software on a computer that
will be used to view and configure servers over a network. To begin installation, click Install on the next window
that appears.
In the Client mode of installation, the MegaRAID Storage Manager software installs only client-related
components, such as the MegaRAID Storage Manager GUI.
Use this mode when you want to manage and monitor servers remotely. When you install the MegaRAID Storage
Manager software in Client mode on a laptop or a desktop, you can log in to a specific server by providing the IP
address.
Select the Server radio button to install only those components required for remote server management. To
begin installation, click on Install on the next window that appears.
Select the StandAlone radio button if you will use the MegaRAID Storage Manager software to create and
manage storage configurations on a stand-alone workstation. To begin installation, click on Install on the next
window that appears.
To Next Page
Loading...
