LSI Corporation
- 159 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 6: StorCLI
Working with the Storage Command Line Tool
Table 36 Verbs in the StorCli Command Syntax
<[adverb | attributes | properties] > – Specifies what the verb modifies or displays.
<[key=value]> – Specifies a value, if a value is required by the command.
6.6 Working with the Storage Command Line Tool
This section describes the commands supported by the Storage Command Line Tool.
NOTE The Storage Command Line Tool is not case sensitive.
CAUTION The order in which you specify the command options should be the
same as in the User Guide; otherwise, the command will fail.
NOTE The Storage Command Line Tool does not support the Snapshot
feature.
6.6.1 System Commands
6.6.1.1 System Show Commands
The Storage Command Line Tool supports the following system show commands:
storcli show
storcli show all
storcli show ctrlcount
storcli show help
storcli -v
Verbs Description
add This verb adds virtual drives, JBODs, and so on to the object identifier.
del This verb deletes a drive, value, or property of the object identifier.
set This verb sets a value of the object identifier.
show This verb shows the value and properties of the object identifier.
pause This verb pauses an ongoing operation.
resume This verb resumes paused operation.
compare This verb compares an input value with a system value.
download This verb downloads and flashes a file to the target.
start This verb starts an operation.
flush This verb flushes a controller cache or a drive cache.
stop This verb stops an operation that is in progress. A stopped process cannot be resumed.
import This verb imports the foreign configuration into the drive.
expand This verb expands the size of the virtual drive.
insert This verb replaces the configured drive that is identified as missing, and starts an automatic rebuild.
flasherase This verb erases the flash memory on the controller.
transform This verb downgrades the firmware memory on the controller.
restart This verb restarts the controller without a system reboot.
apply This verb applies the activation Key to a WarpDrive card.
To Next Page
Loading...
