LSI Corporation
- 299 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 10: Monitoring Controllers and Their Attached Devices
Authenticating the SMTP Server
Figure 185 Mail Server Options
2. Enter a sender’s email address in the Sender email address field, or edit the existing sender email address.
3. Enter your SMTP server name/IP Address in the SMTP Server field, or edit the existing details.
4. Clear the Use Default check box to enter the desired port number in the Port field.
5. Click OK.
10.8 Authenticating the SMTP Server
The MegaRAID Storage Manager software supports a SMTP authentication mechanism called Login. This feature
provides an extra level of security, while sending an email from the MegaRAID Storage Manager server.
To enter or modify the SMTP server authentication information, perform the following steps:
1. On the Configure Alerts window, click the Mail Server tab.
The Mail Server options appear, as shown in Mail Server Options.
2. If on your SMTP server, the authentication mechanism is enabled and if you want to enable this feature on the
MegaRAID Storage Manager software, then you need to select the This Server requires authentication check
box and enter the authentication details in the corresponding fields (User name and Password).
To Next Page
Loading...
