LSI Corporation
- 221 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 7: MegaRAID Storage Manager Overview and Installation
Installing and Configuring an SNMP Agent
4. Click Next, and follow any prompts to complete the installation procedure.
7.6.2.3 Configuring SNMP Service on the Server Side
Perform the following steps to configure SNMP Service on the server side.
1. Select Administrative Tools from the Control Panel.
2. Select Services in the Administrative Tools window.
3. Select SNMP Service in the Services window.
4. Open SNMP Service.
5. Click the Security tab, and make sure that Accept SNMP Packets from any host is selected.
6. Click the Traps tab, and select the list of host IP addresses to which you want the traps to be sent with the
community name.
7.6.2.4 Installing SNMP Service for the Windows 2008 Operating System
Before you install the LSI Agent, make sure that SNMP Service is already installed in the system.
If you do not have SNMP Service installed on your system, perform the following steps to install SNMP Service for
Windows 2008 system.
1. Select Program and Features from the Control Panel.
2. Click Turn windows feature on/off to select the windows components to install.
3. Select Features from the menu.
4. Click Add Features.
5. Select SNMP Services.
6. Click Next.
7. Click Install, and the SNMP installation starts. You will be prompted for the Windows 2008 CD during the
installation.
8. Insert the CD, and click Ok.
The installation resumes.
After the installation is finished, the system displays a message saying that the installation is successful.
7.6.2.5 Configuring SNMP Service on the Server Side for the Windows 2008 Operating System
To configure SNMP service on the server side for Windows 2008 operating system, perform the following steps:
1. Select Administrative Tools from the Control Panel.
2. Select Services from Administrative Tools window.
3. Select SNMP Service from the Services window.
4. Open SNMP Service, and go to its properties.
5. Go to the Security t ab, and make sure that Accept SNMP Packets from any host is selected.
6. Click the Traps
tab, and select the list of host IP addresses to which you want the traps to be sent with the
community name.
7.6.3 Prerequisite for Installing SNMP Agent on Linux Server
For installing the SNMP application, you need the libstdc++.so.6. library. This library is present in the
/usr/lib directory.
You can install the SNMP application (net-snmp) from the Linux software component RPM that provides these
libraries. These RPMs are available in the Linux OS DVD.
To Next Page
Loading...
