Lenovo ThinkServer RD650 - Roll Back to Default Individual Event Configuration; Entering or Editing the Sender Email Address and SMTP Server

LSI Corporation
- 298 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 10: Monitoring Controllers and Their Attached Devices
Roll Back to Default Individual Event Configuration
10.6 Roll Back to Default Individual Event Configuration
To revert back to the default alert delivery method and the default severity level of an individual event, perform the
following steps:
1. On the Configure Alerts window, click the Alerts Setting tab.
The Alerts Setting portion of the window appears.
2. Click Change Individual Events.
The Change Individual Events dialog appears, as shown in Change Individual Events. The dialog shows the
events by their ID number, description, and the severity level.
3. Click Restore Defaults.
The Change Individual Events dialog appears with the default alert delivery method and the default severity
level of all individual events.
4. Click OK to return to the Configure Alerts window.
5. In the Configure Alerts window, click OK to save all the changes made to the events.
10.7 Entering or Editing the Sender Email Address and SMTP Server
You can use the Configure Alerts window to enter or edit the sender email address and the SMTP server.
1. On the Configure Alerts window, click the Mail Server tab.
The Mail Server options appear, as shown in the following figure.