Lenovo ThinkServer RD650 - Drive Firmware Download Commands; Locate Drives Commands; Prepare to Remove Drives Commands

LSI Corporation
- 174 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 6: StorCLI
Working with the Storage Command Line Tool
Input example:
storcli /c0/e56/s1 stop initialization
6.6.3.5 Drive Firmware Download Commands
The Storage Command Line Tool supports the following command to download drive firmware:
storcli /c
x[/ex]/sx download src=filepath [satabridge]
This command flashes the firmware with the specified file. The satabridge option lets you download the SATA
bridge firmware in online mode.
Input example:
storcli /c0/e56/s1 download src=c:\file1.bin
6.6.3.6 Locate Drives Commands
The Storage Command Line Tool supports the following commands to locate a drive and activate the physical disk
activity LED:
storcli /cx[/ex]/sx start locate
storcli /cx[/ex]/sx stop locate
The detailed description for each command follows.
storcli /c
x[/ex]/sx start locate
This command locates a drive and activates the drive’s LED.
Input example:
storcli /c0/e56/s1 start locate
storcli /c
x[/ex]/sx stop locate
This command stops a locate operation and deactivates the drive’s LED.
Input example:
storcli /c0/e56/s1 stop locate
6.6.3.7 Prepare to Remove Drives Commands
The Storage CLI supports the following commands to prepare the physical drive for removal:
storcli /cx[/ex]/sx spindown
storcli /cx[/ex]/sx spinup
The detailed description for each command follows.
storcli /c
x[/ex]/sx spindown
This command spins down an unconfigured drive and prepares it for removal. The drive state is unaffiliated and it is
marked offline.
Input example:
storcli /cx/e34/s4 spindown
storcli /c
x[/ex]/sx spinup
This command spins up a spun-down drive and the drive state is unconfigured good.
Input example:
storcli /cx/e34/s4 spinup