LSI Corporation
- 317 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 11: Maintaining and Managing Storage Configurations
Running a Consistency Check
11.2.3 Running a Group Consistency Check
You can run a consistency check on multiple drives at one time. Follow these steps to run a group consistency check.
1. Select Manage > Check Consistency.
The Group Consistency Check dialog appears.
Figure 199 Group Consistency Check Dialog
2. Either check the virtual drives on which to run the consistency check, or click Select All to select all of the virtual
drives.
3. Click Start.
You can monitor the progress of the group consistency check. See Monitoring Rebuilds and Other Processes for
more information.
To Next Page
Loading...
