LSI Corporation
- 374 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Appendix B: 3ware CLI Commands to StorCLI Command Conversion
Appendix B: 3ware CLI Commands to StorCLI Command Conversion
B.1 System Commands
Table 58 System Commands
B.2 Controller Commands
Table 59 Controller Commands
Description 3ware CLI Command StorCLI Command
Show a general summary of all
detected controllers.
tw_cli show show
show ctrlcount
Description 3ware CLI Command StorCLI Command
Show all information about the adapter,
such as cluster state, BIOS, alarm,
firmware, version, and so on.
tw_cli /cx show all /cx show all
Download the firmware to all
compatible controllers that can be
flashed with the image. By default, CLI
checks for signature and version.
/cx update
fw=filename_with_path
[force]
/cx download src=filepath [nosigchk]
[noverchk]
Show the status of properties related to
the controllers.
/cx show <PropertyName>/cx show <PropertyName>
The following properties can be used
with this command:
The following properties can be used with this command:
a0,1,2|-aALL abortcconerror
achip
AENs [reverse]
activityforlocate
alarms [reverse] alarm
allunitstatus autorebuild
autocarve backplane
autorebuild batterywarning
bios bgirate
carvesize bootwithpinnedcache
ctlbus diag cachebypass
dpmstat [type=<inst|ra|ext> cacheflushint
driver ccrate
drivestatus clusterenable
events [reverse] coercion
exportjbod firmware copyback
memory directpdmapping
model ds
To Next Page
Loading...
