LSI Corporation
- 76 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 4: Ctrl-R Utility
Converting Unconfigured Good Drives to JBOD Drives
Figure 49 Convert JBOD to Unconfigured Good
3. Select the JBODs which you want configured as Unconfigured Good drives.
To select or deselect all the JBODs at one go, select the top most square brackets in the JBOD Drives box.
4. Press OK.
The selected JBODS are converted to Unconfigured Good drives.
Perform the following steps to convert a particular JBOD drive to an Unconfigured Good drive:
1. In the Drive Management screen, navigate to a JBOD drive, and press the F2 key.
2. Navigate to Make Unconfigured Good, and press Enter.
3. Press Ye s in the confirmation message box to proceed.
4.12 Converting Unconfigured Good Drives to JBOD Drives
You can convert a bunch of Unconfigured Good drives to JBOD drives (from the VD Mgmt screen) or you can convert
a particular Unconfigured Good drive to a JBOD drive (from the Drive Management screen).
Perform the following steps to convert a bunch of Unconfigured Good drives to JBOD drives:
1. In the VD Mgmt screen, navigate to the controller, and press the F2 key.
2. Navigate to Make JBOD, and press Enter.
The Convert Unconfigured Good to JBOD dialog appears, which shows all Unconfigured Good drives available
in the system.
To Next Page
Loading...
