LSI Corporation
- 315 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 11: Maintaining and Managing Storage Configurations
Running a Consistency Check
To run a consistency check, first set the consistency check properties, and then schedule the consistency check. This
section explains how to set the properties, schedule the check, and run the consistency check.
11.2.1 Setting the Consistency Check Settings
Follow these steps to set the properties for a consistency check:
1. Click the Physical tab or the Logical tab and select a controller.
2. Click Go To > Controller > Set Consistency Check Properties.
The Set Consistency Check Properties dialog appears.
Figure 197 Set Consistency Check Properties Dialog
3. Choose one of the two options:
— Stop Consistency Check on Error: The RAID controller stops the consistency check operation if the utility
finds an error.
— Continue Consistency Check and Fix Errors: The RAID controller continues the consistency check if the
utility finds and error, and then fixes the errors.
4. Click Ok.
11.2.2 Scheduling a Consistency Check
Follow these steps to set the properties for a consistency check:
1. Click the Physical tab or the Logical tab, and select the controller.
2. Select Go To > Controller > Schedule Consistency Check.
The Schedule Consistency Check dialog appears.
To Next Page
Loading...
