LSI Corporation
- 339 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 12: Using MegaRAID Advanced Software
Using the MegaRAID CacheCade Pro 2.0 Software
Figure 222 Set Virtual Drive Properties
2. Edit the name of a CacheCade virtual drive in the Name field.
3. Select a write policy from the Write Policy drop-down list.
4. Click OK.
A confirmation dialog appears with a warning note.
5. Select the Confirm check box, and click OK.
12.10.2 Enabling SSD Caching on a Virtual Drive
You can enable SSD caching on a virtual drive. When you enable SSD caching on a virtual drive, that virtual drive
becomes associated with an existing or with a future CacheCade SSD Caching virtual drive. This option is only
available when the virtual drive’s caching is currently disabled.
Perform the following steps to enable SSD caching on a virtual drive:
1. Perform one of these actions:
— Right-click on a virtual drive in the left frame of the MegaRAID Storage Manager window, and select Enable
SSD Caching.
— Select a virtual drive, and select Go To > Virtual Drive > Enable SSD Caching.
The Enable SSD Caching dialog appears, as shown in the following figure.
Figure 223 Enable SSD Caching
2. Click OK to enable caching for that virtual drive.
To Next Page
Loading...
