LSI Corporation
- 331 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 12: Using MegaRAID Advanced Software
Deactivate Trial Software
If the advanced software is not secured, the Secure MegaRAID Advanced Software - Confirmation dialog
appears, as shown in Figure 208.
12.8 Deactivate Trial Software
When you want to deactivate a trial software, use the Deactivate All Trial Software wizard.
Perform the following steps to enable the deactivate trial software button:
1. Click Deactivate All Trial Software in the Manage MegaRAID Advanced Software Options dialog.
The Deactivate All Trial Software - Confirmation dialog appears, as shown in the following figure.
Figure 214 Deactivate All Trial Software - Confirmation Dialog
2. Select the Confirm check box, if you want to deactivate the software applications, that are used with a trial key.
3. Click Yes.
The trial software is deactivated.
12.9 Using the MegaRAID CacheCade Advanced Software
The MegaRAID CacheCade software provides you with read caching capability.
Perform the following steps to use the CacheCade advanced software.
1. Click a RAID controller icon in the left frame.
2. Select Go To > Controller > Create CacheCade - SSD Caching on the menu bar.
The wizard dialog appears.
3. Click on unconfigured CacheCade - SSD Caching drives in the left frame to select the drives for the CacheCade
drive group, as shown in the following figure.
To Next Page
Loading...
