LSI Corporation
- 48 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 4: Ctrl-R Utility
Ctrl-R Utility Menus
Figure 15 VD Mgmt
This screen shows information on the configuration of controllers, drive groups, and virtual drives.
The right panel of the screen shows attributes of the selected device.
In the Virtual Drive Management screen, you can perform tasks, such as creating and initializing virtual drives;
performing a consistency check; deleting, expanding, and erasing virtual drives; importing or clearing foreign
configurations; and creating CacheCade virtual drives.
NOTE Based on the controller settings that you make, options will be
enabled or disabled.
4.5.2 PD Mgmt Menu
The PD Mgmt menu shows information about all the physical drives connected to the selected controller. This menu
also shows information about enclosures, the number of physical drives in an enclosure, and all of the direct-attached
drives under a backplane node.
To Next Page
Loading...
