Lenovo ThinkServer RD650 - Event Log Properties Commands

LSI Corporation
- 396 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Appendix C: MegaCLI Commands to StorCLI Command Conversion
Event Log Properties Commands
C.9 Enclosure Commands
Table 78 Enclosure Commands
C.10 PHY Commands
Table 79 PHY Commands
C.11 Alarm Commands
Table 80 Alarm Commands
15.19 Event Log Properties Commands
Description MegaCLI Command StorCLI Command
Show enclosure information. MegaCli –EncInfo
-aN|-a0,1,2|-aALL
storcli /cx/ex show
storcli /cx/ex show all
Show enclosure status. MegaCli –EncStatus
-aN|-a0,1,2|-aALL
storcli /cx/ex show status
Description MegaCLI Command StorCLI Command
Show PHY information. MegaCli –PHYInfo -phyM
-aN|-a0,1,2|-aALL
storcli /cx/px(x|all) show
storcli /cx/px(x|all) show all
Set PHY link speed. MegaCLI PhySetLinkSpeed -phyM
-speed -aN|-a0,1,2|-aALL
storcli /cx/px(x|all) set
linkspeed=0(auto)|1.5|3|6|12
Show the PHY error counters. Megacli PhyErrorCounters -An storcli /cx/px(x|all) show
storcli /cx/px(x|all) show all
Description MegaCLI Command StorCLI Command
Show alarm properties. MegaCli -AdpGetProp AlarmDsply
-aN|-a0,1,2|-aALL
storcli /cx(x|all) show alarm
Set alarm properties. MegaCli -AdpSetProp AlarmEnbl |
AlarmDsbl | AlarmSilence
-aN|-a0,1,2|-aALL
storcli /cx(x|all) set
alarm=<on|off|silence>