LSI Corporation
- 203 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 7: MegaRAID Storage Manager Overview and Installation
Installing MegaRAID Storage Manager
7.3 Installing MegaRAID Storage Manager
This section explains how to install (or reinstall) the MegaRAID Storage Manager software on your workstation or on
your server for the supported operating systems: Microsoft Windows, Red Hat Linux, SUSE Linux, Solaris 10 x86, and
Solaris SPARC.
7.3.1 Prerequisite for MegaRAID Storage Manager Installation
The MegaRAID Storage Manager software installation script also installs the LSI SNMP agent, Red Hat Package
Manager (RPM). The LSI SNMP agent application depends upon the standard SNMP-Util package.
Make sure that the SNMP-Util package is present in the system before you install the MegaRAID Storage Manager
software.
The SNMP-Util package includes the net-snmp-libs and the net-snmp-utils RPMs and additional dependent RPMs.
Make sure that these RPMs are installed from the operating system media before you install the MegaRAID Storage
Manager software.
7.3.2 Installing MegaRAID Storage Manager Software on Microsoft Windows
To install the MegaRAID Storage Manager software on a system running the Microsoft Windows Server 2003,
Microsoft Windows Server 2008, Microsoft Server 2008 R2, Microsoft Windows XP, Microsoft Windows Vista, Microsoft
Windows 7, or Microsoft Windows 8 operating system, perform the following steps:
1. Insert the MegaRAID Storage Manager software installation CD in the CD-ROM drive.
If necessary, find and double-click the setup.exe file to start the installation program.
2. In the Welcome screen that appears, click Next.
If the MegaRAID Storage Manager software is already installed on this system, then an upgraded installation
occurs.
3. Read and accept the user license and click Next.
The Customer Information window appears, as shown in the following figure.
To Next Page
Loading...
