LSI Corporation
- 117 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 5: The HII Configuration Utility
Managing Controllers
5. (Optional) To exclude specified virtual drives from consistency checks, highlight the Exclude Virtual Drives field
and press Enter.
The Exclude Virtual Drives dialog appears, listing the virtual drives defined on this controller.
You might want to exclude a virtual drive from a consistency check if, for example, you are running some
operation on the drive and you do not want it to be interrupted by a consistency check.
6. To exclude a virtual drive from the consistency check, highlight the field to the right of the drive name and press
the spacebar.
An X in this field means the virtual drive does not undergo a consistency check.
7. Highlight the Apply Changes field and press Enter.
The program returns you to the Schedule Consistency Check dialog.
8. Highlight the Apply Changes field on the Schedule Consistency Check dialog and press Enter.
The consistency check changes are now registered.
5.4.5 Saving or Clearing Controller Events
The following window appears when you select Save Controller Events from the Advanced Controller
Management menu.
NOTE An error message appears if the controller events log is empty.
Figure 81 Save Controller Events
Perform these steps to save controller event log entries to a file.
1. To select a different file system from the one listed in the Select File System field, highlight the current file system
name and press Enter.
An error message appears if there is no file system.
2. Select a file system from the pop-up menu and press Enter.
To Next Page
Loading...
