LSI Corporation
- 133 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 5: The HII Configuration Utility
Managing Virtual Drives
Figure 98 Reconfigure Virtual Drives
3. To change the RAID level of the selected virtual drive, highlight New RAID Level and press Enter.
4. Select a RAID level from the popup menu.
5. To add physical drives to the selected virtual drive, highlight Add Drives and press Enter.
The following dialog appears.
Figure 99 Select Drives Screen
6. (Optional) To change the default Select Media Type value, highlight this field, press Enter, and select an option
from the pop-up menu.
To Next Page
Loading...
