LSI Corporation
- 227 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 7: MegaRAID Storage Manager Overview and Installation
Prerequisites to Running MegaRAID Storage Manager Remote Administration
Make sure Class D multicast IP addresses are registered (at least 229.111.112.12 should be registered for the
MegaRAID Storage Manager software to work); if not, create a static route using the following command:
Route add 229.111.112.12 dev eth1
4. Install the MegaRAID Storage Manager software. If the MegaRAID Storage Manager software is already installed,
restart the MegaRAID Storage Manager Framework.
To Next Page
Loading...
