***Confidentiality***
- 255 -
***MainBookTitle***
***ReleaseDate***
Chapter 8: MegaRAID Storage Manager Window and Menus
MegaRAID Storage Manager Main Menu
The Group Show Progress dialog appears, as shown in the following figure. If Patrol Read is running, the Group
Show Progress Patrol Read dialog appears.
Figure 148 Group Show Progress
Suspend (Alt+S) – Click the Suspend button to suspend the background operation taking place at that particular
point of time. When the operations gets suspended, the Resume button appears instead of the Suspend button.
Resume (Alt+E) – Click the Resume button to resume the operation from the point where it was suspended last.
Abort (Alt+B) – Click the Abort button to abort the ongoing active operation.
Resume All (Alt+R) – Click the Resume All button to resume all the suspended operations from the point they
were suspended. This button is disabled if no operations are suspended.
Suspend All (Alt+S) – Click the Suspend All button to suspend all the active operations. The Suspend All button
is enabled only if one or more operations are in active state.
Abort All (Alt+A) – Click the Abort All button to abort all the active operations.
Close (Alt+C) – Click the Close button to close the dialog.
NOTE Suspend, Resume, Suspend All, and Resume All will be applicable
only for background initialization, rebuild, replace, and consistency
check operations.
To Next Page
Loading...
