LSI Corporation
- 347 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Chapter 12: Using MegaRAID Advanced Software
LSI MegaRAID SafeStore Encryption Services
Figure 230 Enable Drive Security - Security Key
6. (Optional) Select the Pause for password at boot time check box.
If you choose this option, you must enter the password whenever you boot the server.
7. (Optional) Select the Enforce strong password security check box.
If you choose this option, make sure the password is between 8 and 32 characters and contain at least one
number, one lowercase letter, one uppercase letter, and one non-alphanumeric character (e.g. < > @ +). The space
character is not permitted. The password is case-sensitive.
8. (Optional) Enter a password in the Password field and then enter the same password in the Confirm field.
Warning messages appear if a mismatch exists between the characters entered in the Password field and the
Confirm field, or if there is an invalid character entered.
NOTE Be sure to record the password. If you lose the password, you could
lose access to your data.
The following figure shows the password entered and confirmed on this dialog.
To Next Page
Loading...
