Lenovo ThinkServer RD650 - Page 393

LSI Corporation
- 393 -
12Gb/s MegaRAID SAS Software User Guide
March 2014
Appendix C: MegaCLI Commands to StorCLI Command Conversion
Battery Commands
Secure the virtual drive. MegaCLI --LDMakeSecure
-Lx|-L0,1,2,...|-Lall –An
storcli /cx/vx set security=on
Show specific properties of
virtual drives.
MegaCli –LDGetProp -Cache |
-Access | -Name | -DskCache
-Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
storcli /cx/vx show
Start virtual drive initialization. MegaCli –LDInit –Start [Fast|Full]
-Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
storcli /cx/v(x|all) start init[Full]
Stop a running virtual drive
initialization.
MegaCli –LDInit -Abort
-Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
storcli /cx/v(x|all) stop init
Show the initialization progress. MegaCli –LDInit –ShowProg
-Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
storcli /cx/v(x|all) show init
Start a consistency check on an
uninitialized virtual drive.
MegaCli –LDCC –Start
–Lx|-L0,1,2|-Lall
-aN|-a0,1,2|-aALL
storcli /cx/v(x|all) start cc[Force]
Start, stop, suspend, resume,
and show the progress of a
consistency check operation.
MegaCli -LDCC -Start|-Abort|
-Suspend|-Resume|-ShowProg|
-ProgDsply -Lx|-L0,1,2|-LALL
-aN|-a0,1,2|-aALL
storcli /cx/v(x|all) start cc
storcli /cx/v(x|all) stop cc
storcli /cx/v(x|all) pause cc
storcli /cx/v(x|all) resume cc
storcli /cx/v(x|all) show cc
Enable/disable automatic
background initialization.
Show, stop, pause, resume, and
show the progress of the
background initialization.
MegaCLI -LDBI -Enbl|-Dsbl|
-getSetting|-Abort|-Suspend|
-Resume|-ShowProg|-ProgDsply
-Lx|-L0,1,2|-LALL
-aN|-a0,1,2|-Aall
storcli /cx/v(x|all) set autobgi=On|Off
storcli /c
x/v(x|all) show autobgi
storcli /cx/v(x|all) stop bgi
storcli /cx/v(x|all) pause bgi
storcli /cx/v(x|all) resume bgi
storcli /cx/v(x|all) show bgi
Start and show progress for a
migrate operation.
MegaCli –LDRecon {–Start –Rx [Add
| Rmv PhysDrv[E0:S0,E1:S1,...] ] }
| –ShowProg|-ProgDsply –Lx –aN
storcli /cx/vx start migrate type=raidx
[option=add|remove
drives=[e:]s|[e:]s-x|[e:]s-x,y] [Force]
storcli /cx/v(x|all) show migrate
Delete preserved cache. MegaCLI -DiscardPreservedCache
-Lx|-L0,1,2|-Lall -force
-aN|-a0,1,2|-aALL
storcli /cx/v(x|all) delete
preservedcache[force]
Assign the CacheCade virtual
drive.
MegaCLI -Cachecade -assign|-remove
-Lx|-L0,1,2|-LALL
-aN|-a0,1,2|-aALL
storcli /cx/vx|all set ssdCaching=on|off
Description MegaCLI Command StorCLI Command