Lenze 8400 - Page 1152

15 Parameter reference
15.2 Parameter list
1152
Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Bit 5 xx.06: MCK modulo multi, opt. From version 17.00.00 onwards
0 ≡ (Previous procedure):
• Modulo multiple clocking with one clock cycle too
many.
1 ≡ Involvement of the blocking zone for a defined
multiple clocking in case of positioning AbsCw and
AbsCcw.
Activation of the Modulo measuring system
Bit 6 xx.07: Reserved
Bit 7 xx.08: Reserved
Bit 8 xx.09: Reserved
Bit 9 xx.10: Reserved
Bit 10 xx.11: Reserved
Bit 11 xx.12: Reserved
Bit 12 xx.13: Reserved
Bit 13 xx.14: Reserved
Bit 14 xx.15: Reserved
Bit 15 xx.16: Reserved
Bit 16 xx.17: Reserved
Bit 17 xx.18: Reserved
Bit 18 xx.19: Reserved
Bit 19 xx.20: Reserved
Bit 20 xx.21: Reserved
Bit 21 xx.22: Reserved
Bit 22 xx.23: Reserved
Bit 23 xx.24: Reserved
Bit 24 xx.25: Reserved
Bit 25 xx.26: Reserved
Bit 26 xx.27: Reserved
Bit 27 xx.28: Reserved
Bit 28 xx.29: Reserved
Bit 29 xx.30: Reserved
Bit 30 xx.31: Reserved
Bit 31 xx.32: Reserved
Subcodes Lenze setting Info
C02868/1 0x00000000 List of modifications 01
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT
Parameter | Name:
C02868 | Setting of compatibility
Data type: UNSIGNED_32
Index: 21707
d
= 54CB
h