8 Basic drive functions (MCK)
8.12 Holding brake control
622
Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Selection of the feedforward control value
From version 06.00.00 onwards, the feedforward control value can be selected via bit 4 in C02582
:
• Bit 4 = 0: Automatic selection
• The torque saved at the last stop is used.
• Bit 4 = 1: Manual selection
• bMBrakeStartValue2 = FALSE: The feedforward control value 1 set in C02581/4
is used.
• bMBrakeStartValue2 = TRUE: The feedforward control value set in C02581/5
is used.
Additive torque
If the servo control (SC) operating mode has been selected, an additive torque value in [%] can be
selected via the nBrkTorqueAdd_a input.
Related topics:
Functional settings
( 611)
Switching thresholds
( 612)
To Next Page
Loading...
