Lexmark MX610 - Errors

Action Yes No
Step 3
Remove, and then reinstall the toner cartridge. Make sure that it is
properly seated.
Is the button in the correct position?
Go to step 4. Go to step 5.
Step 4
Run a print test.
Does the problem remain?
Go to step 5. The problem is solved.
Step 5
Replace the toner cartridge
Does the problem remain?
Go to step 6. The problem is solved.
Step 6
Check the gears on the cartridge gearbox for proper rotation and for wear
or damage.
Does it rotate properly and is it free of wear or damage?
Go to step 7. Replace the cartridge
gearbox. See
“Cartridge gearbox
removal” on page
249.
Step 7
Check the cartridge gearbox cable for proper connection to the controller
board.
Is it properly connected?
Go to step 8. Reseat the cable.
Step 8
Check the cartridge gearbox cable for damage.
Is it free of damage?
Replace the controller
board. See “Controller
board removal” on
page 257.
Replace the cartridge
gearbox. See
“Cartridge gearbox
removal” on page
249.
171 errors
171 error messages
Error code Description Action
171.03 Fuser fan error. Go to “Cooling fan service check” on page 127.
171.04 Fuser fan error.
171.05 Fuser fan error.
171.06 Fuser fan error.
171.07 Fuser fan error.
7016
Diagnostic information
126