Stapler accumulator assembly removal
1 Remove the stapler right cover. See “Stapler right cover removal” on page 355.
2 Remove the stapler left cover. See “Stapler left cover removal” on page 356.
3 Remove the stapler rear cover. See “Stapler rear cover removal” on page 364.
4 Remove the stapler rear door. See “Stapler rear door removal” on page 357.
5 Remove the stapler service cover. See “Stapler service cover removal” on page 368.
6 Remove the stapler controller card. See “Stapler controller card removal” on page 368.
7 Remove the stapler cooling fan. See “Stapler cooling fan removal” on page 372.
8 Remove the stapler power supply unit. See “Stapler power supply unit removal” on page 372.
9 Remove the stapler top cover. See “Stapler top cover removal” on page 376.
10 Remove the tamper main assembly. See “Tamper main assembly removal” on page 386.
The accumulator assembly remains.
Sensor (stapler right tamper HP) removal
1 Remove the stapler right cover. See “Stapler right cover removal” on page 355.
2 Remove the stapler left cover. See “Stapler left cover removal” on page 356.
3 Remove the stapler rear cover. See “Stapler rear cover removal” on page 364.
4 Remove the stapler service cover. See “Stapler service cover removal” on page 368.
5 Remove the stapler controller card. See “Stapler controller card removal” on page 368.
6 Remove the stapler cooling fan. See “Stapler cooling fan removal” on page 372.
7 Remove the stapler power supply unit. See “Stapler power supply unit removal” on page 372.
8 Remove the stapler top cover. See “Stapler top cover removal” on page 376.
9 Remove the tamper main assembly. See “Tamper main assembly removal” on page 386.
10 Remove the tamper sub-assembly. See “Tamper sub-assembly removal” on page 387.
7016
Repair information
393
To Next Page
Loading...
