Lexmark MX610 - Page 473

error codes
0‑99.99 111
111 error messages 118
121 error messages 119
126 error messages 121
132 error messages 122
133 error messages 123
140 error messages 123
146 error messages 124
155 error messages 125
171 error messages 126
200 paper jam messages 54
202 paper jam messages 60
23y paper jam messages 63
241 paper jam messages 66
242–24455 paper jam messages 69
25y paper jam messages 76
321–344 error messages 170
381 error messages 174
45y error messages 89
900 errror messages 129
912 errror messages 134
94y errror messages 134
950–958 error messages 135
959 errror messages 137
96y errror messages 138
97y errror messages 139
98y errror messages 139
99y errror messages 140
Error reading USB drive. Remove USB. 100
Error reading USB hub. Remove hub. 100
ESD‑sensitive parts 218
eSF solutions 221
Ethernet port 398
event log
print log 195
exterior of the printer
cleaning 411
F
fax error log codes 165
fax issue, escalating 169
Fax memory full 100
Fax partition inoperative. Contact system
administrator. 100
fax ports 398
Fax server 'To Format' not set up. Contact system
administrator. 101
fax service engineer (SE) menu 215
fax specifications 451
Fax Station Name not set up. Contact system
administrator. 101
Fax Station Number not set up. Contact system
administrator. 101
feed test 197
finisher tests
feed test (finisher) 189
sensor test 189
staple test 189
firmware
updating 179
flatbed edge erase 205
format fax storage 205
H
hardware tests
button test 183
DRAM test 183
panel test 182
USB HS test mode 185
home screen buttons and icons
description 176
horizontal bottom contact connector 226
horizontal sliding contact connector 232
horizontal top contact connector 223
I
Imaging unit low [84.xy] 101
Imaging unit nearly low [84.xy] 101
Imaging unit very low, [x] estimated pages remain
[84.xy] 101
in finisher rear door
paper jams, clearing 81, 86
Incompatible tray [x] [59] 101
Incorrect paper size, open [paper source] [34] 102
input tray tests
feed tests 187
sensor tests 187
input tray, theory 455
inspection guide 409
Insufficient memory for Flash Memory Defragment
operation [37] 102
Insufficient memory to collate job [37] 102
Insufficient memory to support Resource Save feature
[35] 102
Insufficient memory, some Held Jobs were deleted
[37] 102
Insufficient memory, some held jobs will not be
restored [37] 102
invalid code, fixing 213
invalid engine mode
accessing 213
7016
Index
473