Mercury 200 OptiMax Jet Drive

Timing, Synchronizing, and Adjusting
90-8M0050731 MAY 2011 Page 2C-1
2
C
Electrical
Section 2C - Timing, Synchronizing, and Adjusting
Table of Contents
Throttle Cam Adjustment...................................................2C-2
Maximum Throttle.......................................................2C-2
Throttle Plate Stop Screw...........................................2C-4
Crankshaft Position Sensor Air Gap..................................2C-4
Throttle Position Sensor (TPS) Adjustment.......................2C-4
Idle Speed Adjustment (All Models)...................................2C-5