182 SyncServer 600 Series User’s Guide 098-00720-000 Revision D1 – February, 2018
Chapter 6 Provisioning
Provisioning the Ethernet Ports
Provisioning the Ethernet Ports
Provisioning Ethernet Port
Ethernet Auto-Negotiation
The Ethernet ports LAN1-LAN6 ports can be configured to allow automatic
negotiation of their connection speeds. When the Speed setting for a port is set to
“Auto” (default), auto-negotiation is enabled and the SyncServer S6x0 will advertise
connection speeds of 100/1000M. The user can also select a connection speed for
a port of 100M or 1000M to configure the speed used by auto-negotiation.
IP Version
The Ethernet ports LAN1-LAN6 ports can be individually configured for either an
IPv4 or IPv6 address. Use the dot-decimal notation format xxx.xxx.xxx.xxx to enter
the IPv4 address parameter.
Table 6-4. Changing a User’s Password
Method Steps Notes
Web Interface Security > Users
1. Select the user with User dropdown box
2. Enter the new password in the New
Password box
3. Enter the new password in the Retype
New Password box
4. Click the Apply button.
CLI n/a
Front Panel n/a
To Next Page
Loading...
