Microsemi SyncServer S600 - Software Options

098-00720-000 Revision D1 – February, 2018 SyncServer 600 Series User’s Guide 29
Chapter 1 Overview
Overview
 Most popular timing signal inputs/outputs are standard in the base Timing I/O
module (IRIG B, 10MHz, 1PPS, etc.) available for the S650.
 Four (4) GbE ports standard, all with NTP hardware time stamping
 Ultra high-bandwidth NTP time server
 Stratum 1 Operation via GNSS satellites
 DoS detection/protection (optional)
 Web-based management with high security cipher suite
 TACACS+, RADIUS, LDAP, and more (optional)
 -20C to +65C operating temperature (Standard and OCXO)
 IPv6/ IPv4 on all ports
 Rubidium Atomic clock or OCXO oscillator upgrades
 Dual power supply option
 PTP and GLONASS/Beidou/SBAS (optional)
 Dual 10G Ethernet module option
 Low Phase Noise (LPN) module option
 Ultra Low Phase Noise (ULPN) module option
 Dual DC power supply option
Software Options
The SyncServer S600/S650 includes built-in hardware features enabled via
software license keys.
 Security Protocol License Option: The SyncServer S600/S650 can be seriously
hardened from both an NTP perspective and an authentication perspective via
this option. This license option includes:
– NTP Reflector - high capacity and accuracy
– Per port packet monitoring and limiting
 FlexPort Timing License Option: The FlexPort™ Technology option enables the 6
output BNCs (J3-J8) to output any supported signal (time codes, sine waves,
programmable rates, and so on.) all configurable in real time through the secure
web interface. The 2 input BNCs (J1-J2) can support a wide variety of input
signal types.
 GNSS License Option: This option enables the SyncServer S600/S650 to use
GPS, GLONASS, SBAS, and BEIDOU signals.
 PTP License Option: This option enables PTP default profile, PTP Enterprise
profile and PTP Telecom-2008 profile master functionality.
 PTP Client License: This option enable PTP client to be configured on an
Ethernet port.