Microsemi SyncServer S600 - Admin > Serial Port Config Parameters - Serial;Data Port; Admin > Serial Port Config Parameters - Console Port

098-00720-000 Revision D1 – February, 2018 SyncServer 600 Series User’s Guide 297
Appendix B Specifications and Factory Defaults
Factory Defaults
Send Trap checked
(all rows)
not checked | checked
Write Log checked
(all rows)
not checked | checked
Send Email not checked
(all rows)
not checked | checked
Table B-42. Admin > Serial Port Config Parameters - Serial/Data Port
Description Default Value Value Range
Baud Rate 9600 4800 | 9600 | 19.2k | 38.4k |
57.6k | 115.2k
Data Bits 8 7 | 8
Parity none none | even | odd
Stop Bits 1 1 | 2
Table B-43. Admin > Serial Port Config Parameters - Console Port
Description Default Value Value Range
Baud Rate 115.2k 4800 | 9600 | 19.2k | 38.4k |
57.6k | 115.2k
Data Bits 8 8 (fixed)
Parity none none (fixed)
Stop Bits 1 1 (fixed)
Table B-41. Admin > Alarms Parameters (Continued)
Description Default Value Value Range