68 SyncServer 600 Series User’s Guide 098-00720-000 Revision D1 – February, 2018
Chapter 3
STATUS Button
State: Shows “Up” if the port is enabled and “Down” if the port is disabled.
IP: IP address for the port
SM: Subnet mask
GW: Gateway address
Clock Status Screen
Hardware Clock and Input Reference status.
GNSS Receiver Status Screen
GNSS receiver status.
Antenna: OK
GNSS: Operational
GNSS SATELLITES
– GPS: number of GPS satellites currently being tracked.
– GLONASS: number of GLONASS satellites currently being tracked
– SBAS: number of SBAS satellites currently being tracked
– Max CNo: The highest CNo (Carrier-to-Noise ratio) of all satellites (value
given for each satellite type)
GNSS SOLUTION
Status: OK Service 3D
Mode: Auto or Manual
SyncServer Status Screen
Hardware and software identification. Software upgrade availability.
Model: The model number.
S.N.: The serial number.
Version: The software "Release Version" number.
Option Slot A/B Status Screens
Shows the configuration of each of the slot A/B input and output connections.
To Next Page
Loading...
