098-00720-000 Revision D1 – February, 2018 SyncServer 600 Series User’s Guide 91
Chapter 4
Navigation Windows
See Figure 4-17.
Figure 4-17. Network - SNMP Traps
Note: Some SNMP browsers and trap managers require that an
SNMPv3 user be created with the same username and authentication
as used for the trap configuration in order for the SNMPv3 discovery
process to complete properly.
Note: SNMP is designed to be used with LAN1. Do not configure a
SNMP manager address in a subnet used by the other LAN ports
(LAN2 - LAN6).
To Next Page
Loading...
