236 SyncServer 600 Series User’s Guide 098-00720-000 Revision D1 – February, 2018
Chapter 7 Maintenance, Troubleshooting & Part Numbers
Preventive Maintenance
Preventive Maintenance
The SyncServer S6x0 requires minimal preventive maintenance. Ensure the unit is
not exposed to hazards such as direct sunlight, open windows, water, or extreme
heat. See Environmental Requirements, on page 48, for electromagnetic
compatibility conditions that may cause damage.
Table 7-1 lists preventive maintenance measures to be performed periodically. Do
not disassemble components just for the purpose of inspection.
Safety Considerations
Follow your company’s safety guidelines and policies when working on or around
live equipment.
ESD Considerations
Maintenance personnel should wear ESD wrist straps when installing or working on
all SyncServer S6x0 equipment. Plug the user-supplied wrist strap into the
SyncServer S6x0.
Caution: To avoid electromagnetic discharge damage to the circuitry,
never attempt to vacuum the SyncServer S6x0.
Table 7-1. Preventive Maintenance
Item Inspection Corrective Action Interval
Chassis Inspect for dirt or foreign
material
Clean the exterior of chassis with
a soft dry cloth
Periodically
Cables Inspect for pinched, worn or
damaged cable
Replace pinched, worn or
damaged cable at the first
opportunity
Periodically
Connectors Inspect for loose or damaged
connector
Tighten loose connectors. If
damaged, replace the connector
and/or cable at the first opportunity
Periodically
To Next Page
Loading...
