Microsemi SyncServer S600 - Admin; Admin > General Parameters

098-00720-000 Revision D1 – February, 2018 SyncServer 600 Series User’s Guide 295
Appendix B Specifications and Factory Defaults
Factory Defaults
Admin
New Password Blank (no value) [<printable ASCII>, 1 – 34 chars
Passwords must contain at least
8 characters, including
uppercase, lowercase letters,
numbers and special characters.
The following characters are not
allowed for the password:
(', ", <, >, &, ), $
Retype New Password Blank (no value) This is same as “New Password”
Recovery Question No selection [ Birth City? | Mother’s Maiden
Name? | Favorite pet’s name? |
Custom ]
<printable ASCII> , 1 – 34 chars
Answer Blank (no value) <printable ASCII>, 1 – 34 chars
Email Address Blank (no value) <printable ASCII>, 1 – 34 chars
SMTP Gateway Blank (no value) <printable ASCII>, 1 – 34 chars
Send Test Email not checked not checked | checked
Table B-39. Admin > General Parameters
Description Default Value Value Range
Hostname SyncServer
Web Session Timeout 10 min 5 | 10 | 15 | 30 | 60
minutes
Check for Software Upgrades checked not checked | checked
Table B-38. Security > Users Parameters (Continued)
Description Default Value Value Range