Microsemi SyncServer S600 - Page 238

238 SyncServer 600 Series User’s Guide 098-00720-000 Revision D1 – February, 2018
Chapter 7 Maintenance, Troubleshooting & Part Numbers
Troubleshooting
Alarm/fault
indicator
NETWO
RK
Green - All configured ports are up n/a
Amber - Some configured ports are
down (LAN2 to LAN4)
Use the Web GUI to view the
configuration and status of
ports,
Network > Ethernet
or expand the “Network” tab to
see the configuration of each
port.
See
Table A-1 in Appendix
A, System Messages
for
corrective actions.
Red - Management port (LAN1) is
not configured or is down
Use the Web GUI to view the
configuration and status of
ports,
Network > Ethernet
or expand the “Network” tab to
see the configuration of each
port.
See
Table A-1 in Appendix
A, System Messages
for
corrective actions.
Table 7-2. LED Conditions (Continued)
Indicator Label Description Corrective Action