Microsemi SyncServer S600 - Page 259

098-00720-000 Revision D1 – February, 2018 SyncServer 600 Series User’s Guide 259
Appendix A System Messages
System Notification Messages
J1B Input LOS
(LOSS OF SIGNAL)
100 Minor No J1B Input LOS
J1B Input LOS cleared
 Check if cable is
securely connected.
 Check signal source
is present and
configured properly.
No action required
J2A Input LOS
(LOSS OF SIGNAL)
101 Minor No J2A Input LOS
J2A Input LOS cleared
 Check if cable is
securely connected.
 Check signal source
is present and
configured properly.
No action required
J2B Input LOS
(LOSS OF SIGNAL)
102 Minor No J2B Input LOS
J2B Input LOS cleared
 Check if cable is
securely connected.
 Check signal source
is present and
configured properly.
No action required
Excessive traffic on
port
2
112 Minor No Excessive traffic on
PORT [1 | 2 | 3 | 4 | 5 6]
Excessive traffic on
PORT [1 | 2 | 3 | 4 | 5 6]
 Check traffic level on
network
 Check for intrusion
attempts.
 Check broadcast
traffic.
(See Footnote 1)
No action required
RESERVED 113

Table A-1. System Notification Messages (Continued)
Description
Event
ID
Msg
Level
Trans-
itory
MsgText Corrective Action