Microsemi SyncServer S600 - Page 271

098-00720-000 Revision D1 – February, 2018 SyncServer 600 Series User’s Guide 271
Appendix B Specifications and Factory Defaults
Specifications
VCCI
Storage Temperature and Humidity
Criteria
IEC 60068-2-1Ab (low temp soak),
IEC 60068-2-2Bb (hi-temp soak)
IEC 60068-2-14Nb (change of temp)
IEC 60068-2-78Cb (humidity storage),
IEC 60068-2-30Db (humidity condensation)
Operational Humidity Criteria IEC 60068-2-78Cb, IEC 60068-2-30Db
General
 NTP (v3 - RFC1305, v4 - RFC5905)
 NTP Unicast, Autokey,
 MD5 (RFC1321)
 SNTP (RFC4330)
 SNMP v2c (RFC1441-1452), v3
(RFC3411-3418)
 Custom MIB
 DHCP (RFC2131)
 DHCPv6 (RFC3315)
 TACACS+ (RFC1492)
 LDAPv3 (RFC4510-4521)
 RADIUS (RFC2865)
 HTTPS/SSL (RFC2616),high encryption
cipher suite
 SMTP Forwarding
 SSHv2
 IPv4/IPv6
 Syslog 1 to 8 servers
 Key management protocols can be
individually disabled.
 PORT 1: Management & Time protocols
 PORT 2, 3 & 4: Time protocols only.
Table B-4. SyncServer S6x0 Compliance Specifications (Continued)
Parameter Description