MIMAKI UJF-3042 - Page 176

© 2013 MIMAKI ENGINEERING CO.,LTD.
6.4.6 P.1
1
2
3
4
5
6
7
8
R.1.0
Maintenance Manual > Disassembly and Reassembly > PCBs > 3042 Pump 3 PCB Assy
Model UJF-3042 Issued 2010.04.08 Revised F/W ver --- Remark
1.0
Rev.
6.4.6 3042 Pump 3 PCB Assy
 Procedures
1. Move the Y-Bar to the farthest position.
2. Turn the main power OFF.
3. Remove the Rear Cover-Right.
4. Disconnect all connectors on PCB.
5. Remove the 3042 Pump 3 PCB Assy..
Screw : P3x6SMW x4
6. Reverse the disassembly procedure for reassembly.
To turn power off, be sure to turn the main power OFF.
3042 Pump 3 PCB Assy
3042 Pump 3 PCB Assy