MIMAKI UJF-3042 - Page 19

1
2
3
4
5
6
7
8
© 2011 MIMAKI ENGINEERING CO.,LTD. 1.2.6 R.2.0 P.1
Maintenance Manual > Operating Principle > Maintenance Function > Filter Check
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver 1.80 / 1.00 Remark
2.0
Rev.
1.2.6 Filter Check
 Indication on LCD
 Processing sequence
STEP. Processing Description
1Start
1. The Y bar comes to the front.
2. Performs cap OFF and moves the head to the maintenance position.
2 Performing maintenance 1. There is no operation of the machine while maintenance is being
performed.
2. Message of maintenance is completed is displayed. Terminate with the
[ENTER].
3End 1. The head caps ON.
2. If the warning of Filter Exchange is displayed, clear it.
3. Clear the counter for the warning of Filter Exchange.
MAINTENANCE
STATION <ENT>
STATION
MENT :CHECK FILTER
STATION
COMPLETED <ENT>