© 2011 MIMAKI ENGINEERING CO.,LTD. 2.3.5 R.2.0 P.1
1
2
3
4
5
6
7
8
Maintenance Manual > Electrical Parts > Circuit Board Specifications > 3042 Slider Relay PCB Assy.
Model UJF-3042/FX Issued 2010.08.27 Revised 2011.09.30 F/W ver 1.80 / 1.00 Remark
2.0
2.3.5 3042 Slider Relay PCB Assy.
Outline
Board name :3042 Slider Relay PCB Assy.
Mounted position :Y-Bar part
Main specifications
This PCB controls the head driving wave shape, the Y motor and other IOs.
List of Connectors
Creating wave shape for head driv-
ing
HPC
Connecting for Work Area sensor Beem sensor (Light receiving side)
Connecting for Water cooling sys-
utem of the UV sytem
Radiator FAN, Water cooling pump, Float sensor of the subtank
Connecting for Cover sensor. Micro SW
Connecting for the Motor Y-Motor, Y-Encorder
Connection between PCBs
(Serial IO I/F)
20-pin FFC connection (3042 Station3 PCB connection)
Connection between PCBs
(HDC I/F)
30-pin FFC connection, twisted pair cable connection (LAN cable is used) .
(UJF-3042 MAIN PCB, 3042 Slider PCB)
Connection between PCBs
(Serial IO I/F)
10-pin FFC connection (3042 Pump3 PCB connection)
Parts No. Pin Connected to:* Connecting
destination CN
Remarks
CN1 12 3042 SL-Relay power short Assy Using for Power of the LED-UV.
CN2 30 UJF-3042 MAIN PCB Assy CN6 HDC IO
CN3 30 3042 Slider PCB Assy CN2 HDC IO
CN4 2 Micro SW(D3M-01K1-3) Cover sensor
CN5 12 3042 Slider PCB Assy CN1 Slider Relay PCB - Slider PCB
Serializer
I/F
CN6 12 UJF-3042 MAIN PCB Assy CN8 Main PCB - Slider Relay PCB
Serializer
I/F
CN7 30 3042 Slider PCB Assy CN4 GND etc
CN8 30 3042 Slider PCB Assy CN6 COM wave I/F
CN9 9 Not Use JTAG IF (CPLD writing or For FPGA JTAG TEST)
CN10 4 Cartridge sensor Assy For cartrdge 1
To Next Page
Loading...
