Minebea Intec PR5900 - Page 14

- Operation using the soft keys, see Chapter 2.1.3.2
- Operation using the navigation keys, see Chapter 2.1.3.3
- Operation using the PC keys, see Chapter 2.1.3.4
- Operation using the VNC program, see Chapter 2.1.4
2.1.3.1 Operation using the front-panel keys
The following table shows the basic meanings of the symbols on the front-panel keys.
Depending on the applications, the keys may also have other meanings.
Indicator keys
Key Description
Set tare
The current gross weight is stored in the tare memory, provided that
- the weight value is stable.
- the device is not in error status.
(Function is dependent on conguration)
Sets gross weight to zero, provided that
- the weight value is stable.
- weight is within zero setting range.
(Function is dependent on conguration)
Display gross/tare weight
Pressing the key switches to the next weight (only with tared scale).
During calibration, pressing this key displays the weight for 5 seconds with
10x resolution.
Switching of display between the weighing points:
- WP‑A
- WP‑B
- WP‑C
- WP‑D
Application keys
Key Description
Starts an application-specic printout.
Navigation keys
Key Description
▲ Scroll up in the menu.
▼ Scroll down in the menu.
Process Controller Maxxis 5 PR 5900 2 Commissioning
Minebea Intec EN-12