Minebea Intec PR5900 - Page 154

- [Interface parameters], see Chapter 4.7.5.5.1.2.
Accessible via MENU - [Operating] - [System setup] - [Weighing points] - [Weighing
point x] - [xBPI scale] - [Setup] - [Conguration] .
WP-C R1 Max 29.9kg d= 0.0005kg
00000
+
kg
xBPI scale setup @admin
Configuration
Select group of specifications
Device information
4.7.5.5.1.1 Weighing parameters
In this menu item (under Conguration), the weighing parameters of the xBPI scale
weighing electronics are congured.
Accessible via MENU - [Operating] - [System setup] - [Weighing points] - [Weighing
point x] - [xBPI scale] - [Setup] - [Conguration] - [Weighing parameters] .
WP-C R1 Max 29.9kg d= 0.0005kg
00000
kg
xBPI scale setup @admin
Weighing parameters
Interface parameters
Select and conrm [Conguration].
The xBPI parameter setup menu opens.
WP-C R1 Max 29.9kg d= 0.0005kg
00000
kg
xBPI scale setup @admin
Weighing parameters
Interface parameters
1. Select and conrm [Weighing parameters].
Process Controller Maxxis 5 PR 5900 4 System setup
Minebea Intec EN-152