Minebea Intec PR5900 - Page 95

4.7.1.1 Parameters
In this menu item, the parameters for the Internal weighing point weighing electronics
are congured.
For detailed descriptions of the following parameters:
- [W&M] (legal metrology), see Chapter 4.7.1.1.1.
- [Range mode] (range selection for scales), multi-range, see Chapter 4.7.1.1.2 and
multi-interval scale, see Chapter 4.7.1.1.3
Accessible via MENU - [Operating] - [System setup] - [Weighing points] - [Weighing
point x] - [Parameters] .
WP-A Max 3000g d= 0.1g
00
g
Weighing points @admin
Weighing point A
Weighing point B
Weighing point C
Weighing point D
Internal weighing point
Pendeo Truck
xBPI scale
User scale
Parameters Calib Units
WP-A Max 3000g d= 0.1g
00
g
Weighing points @admin
Weighing point A
Weighing point B
Weighing point C
Weighing point D
Internal weighing point
Pendeo Truck
xBPI scale
User scale
Parameters Calib Units
1. In this case: Select [Weighing point A] with [Internal weighing point] and press the
[Parameters] soft key.
A selection window opens.
4 System setup Process Controller Maxxis 5 PR 5900
EN-93 Minebea Intec