Minebea Intec X3 Process Indicator PR 5410 User Manual

7.5.7 Creating a PIN code using the front-panel keys
The Setup menu can be protected from unauthorized access with a PIN code dened by
the user.
Setting up a PIN code
2. Press OK.
The "Cd" calibration menu ashes.
Cd 000 appears on the display.
3. Press (1×) to select the "Pd 124" menu.
4. Press OK.
SEArCH appears on the display.
5. Press OK.
YES appears on the display.
6. Press OK.
A search for connected load cells is conducted and the dead load is set
immediately thereafter.
7. Press "Exit" to exit the Setup menu.
1. Press .
SEtuP appears on the display.
2. Press OK.
The "Cd" calibration menu ashes.
Cd 000 appears on the display.
3. Press multiple times to select "oP."
oP 060 appears on the display.
4. Press to change the parameter number ("000" ashes).
5. Press to select the parameter number.
oP 061 appears on the display.
6. Press OK.
PIn appears on the display.
7. Press OK.
000000 (= no prompt) appears on the display.
7 Commissioning X3 Process Indicator PR 5410
EN-135 Minebea Intec

Minebea Intec X3 Process Indicator PR 5410 Specifications

General

Brand	Minebea Intec
Model	X3 Process Indicator PR 5410
Category	Touch Panel
Language	English