7.6.1 Displaying/deleting alibi entries
1. Press .
SEtuP appears on the display.
2. Press OK.
The "Cd" calibration menu ashes.
Cd 000 appears on the display.
3. Press multiple times to select "AL 100."
4. Press OK.
SEQ appears on the display.
5. Press OK.
The sequence number of the last alibi entry appears on the display (right digit
ashes).
6. Press the cursor keys to select the desired sequence number.
7. Press OK.
YEAr appears on the display.
8. Press OK.
The year of the alibi entry appears on the display.
9. Press OK.
dAtE appears on the display.
10. Press OK.
The date of the alibi entry appears on the display.
11. Press OK.
tIME appears on the display.
12. Press OK.
The time of the alibi entry appears on the display.
13. Press OK.
GroSS appears on the display.
14. Press OK.
The gross weight of the alibi entry appears on the display.
15. Press OK.
PrInt appears on the display.
16. Press OK.
7 Commissioning X3 Process Indicator PR 5410
EN-143 Minebea Intec
To Next Page
Loading...