Minebea Intec X3 Process Indicator PR 5410 User Manual

— Remote display Remote display
— Param Selection: Assigned to, Baudrate, Bits, Parity,
Stopbits, Mode
— ModBus RTU
— Param Selection: Assigned to, Baudrate, Bits, Parity,
Stop bits, Slave-ID
— SMA
— Param Selection: Assigned to, Baudrate, Bits, Parity,
Stopbits
— xBPI-Port
— Param Selection: Assigned to, Baudrate, Bits, Parity,
Stopbits
— Date Date
Input: yyyy, mm, dd
— Time Time
Input: hh, mm, ss
— Application Selection: Standard, EasyFill
For description of the web menu see Chapter 9.2.1.
NOTICE
If the VNC viewer is closed on the setup level, the device reboots and the web menu
is not accessible for several seconds.
If the web menu and the device view are required, the [Remote Conguration (VNC)
Popup Window] menu item must be selected in order for two windows to be opened
and the VNC viewer always remains open, even if individual menu items are selected
in the web menu.
7.13 System setup
7.13.1 Serial ports parameter
7.13.2 Date & time
7.13.3 Operating parameter
7 Commissioning X3 Process Indicator PR 5410
EN-149 Minebea Intec

Minebea Intec X3 Process Indicator PR 5410 Specifications

General

Brand	Minebea Intec
Model	X3 Process Indicator PR 5410
Category	Touch Panel
Language	English