Minebea Intec X3 Process Indicator PR 5410 User Manual

- Operating parameter [Operating parameter]
- Printing parameter [Printing parameter]
Note:
This menu item is only available if under -[Operating parameter]- [Application]
"Standard" has been selected.
- Fieldbus parameter [Fieldbus parameter]
- Network parameter [Network parameter]
- Conguring limits [Limit parameter]
Note:
This menu item is only available if under -[Operating parameter]- [Application]
"Standard" has been selected.
- Conguring digital inputs and outputs [Digital i/o parameter]
Note:
This menu item is only available if under -[Operating parameter]- [Application]
"Standard" has been selected.
- Conguring analog output [Analog output parameter]
7.17.1 Selecting and conguring serial interfaces
The interfaces are congured under this menu item.
Select - [Serial ports parameter] and conrm.
7 Commissioning X3 Process Indicator PR 5410
EN-207 Minebea Intec

Minebea Intec X3 Process Indicator PR 5410 Specifications

General

Brand	Minebea Intec
Model	X3 Process Indicator PR 5410
Category	Touch Panel
Language	English