Minebea Intec X3 Process Indicator PR 5410 User Manual

- The "EasyFill" application allows for quick and reliable lling and emptying of vessels
(for functional description, see Chapter 6.1).
- Analog test for the weighing electronics
- Overwrite protection using CAL switch on the main board
3.2.1 Communication protocols
For the internal RS-232 or external RS-232 + RS-485 (accessories):
- Remote display protocol
- Printer
- ModBus-RTU (slave)
- SMA protocol
- xBPI protocol
- EW-Com protocol
Fieldbus slave (accessories):
- PR 1721/31 ProBus-DP
- PR 1721/32 InterBus-S
- PR 1721/34 DeviceNet
- PR 1721/35 CC-Link
- PR 1721/36 ProNet I/O
- PR 1721/37 EtherNet IP
For the internal LAN:
- ModBus-TCP
- Ethernet TCP/IP
- OPC
3.3 Housing
3.3.1 General information
The device has an aluminum housing with IP65 front. It can also be used as a control
cabinet version.
The keypad and the display form one unit with the front. A rectangular cut-out is required
for the installation. Cable connections are made at the back of the housing.
The ambient conditions specied for the device must be observed (see Chapter 17.4.1).
Openings for max. 2 plug-in cards are sealed by dummy plates.
X3 Process Indicator PR 5410 3 Device description
Minebea Intec EN-16

Minebea Intec X3 Process Indicator PR 5410 Specifications

General

Brand	Minebea Intec
Model	X3 Process Indicator PR 5410
Category	Touch Panel
Language	English